MXMA 4800 Cone Valve Fork



Lightweight construction

More comfort when using harder set-ups

All adjustments made externally

No sealing surface so minimum drop of pressure after valves opens

Unlimited opening up of WP Cone Valve so harshness reduced

No shims, therefore no loss of damping because of bent shims

HQ coating


Technical description

The WP Motorsports Cone Valve technology permits almost limitless damping performance due to a unique valving system. The setup of a conventional damping system has always been a compromise between sufficient comfort and bottoming reserves, whereas the Cone Valve technology now permits a combination of both factors, resulting in outstanding damping behavior in all driving situations. The WP Cone Valve Fork comes made to measure for every customer and is made of the highest quality materials and coatings which have been developed in close collaboration with current World Championship riders of KTM, HUSQVARNA and many more. Enjoy the riding experience with our top of the line suspension.

Technical Data

  • Piston 23 mm
  • Piston rod 12 mm
  • Inner tube 48 mm


  • Spring Preload  
  • Compression Damping  
  • Rebound Damping  

Installation guide

WP Cone Valve Forks replace the original fork. They are designed to fit in the original triple clamp and to be used with the original axle. The fork can also be reused for other motorbikes of the same type. The forks can be fine-tuned by any WP Distributor to match the requirements for individual tracks or usage (e.g. Rally). Additionally a wide range of simple adjustments allows the rider to fully adjust the fork on both fork legs. WP Cone Valve Forks are tested and designed to offer the highest performance in combination with the WP TRAX shock absorbers.


Individual suspension elements for each type of rider - configure your own suspension setup.

start configuration